HT2800T_en_c.doc Page 173 of 275
Figure 144: Rack placing
7.9.2 Eco Savings
Only for Headspace and SPME mode.
This function is used to set the stand by temperatures.
Access sequence: RUN>SETTINGS>ECO SAVINGS In
the “Eco Savings” screen you can set:
•
St by syringe: only for Headspace mode. It sets the syringe stand by temperature. This
value can be between 40°C and 150°C (active conditioning) or off (inactive conditioning);
•
St by oven: sets the oven stand by temperature. This value can be between 40°C and
170°C (active conditioning) or off (inactive conditioning);
•
St by flush: only for Headspace mode. It allows the user to open or close the valve that
controls the purging gas flow inside the syringe. Select one of the following values:
On
The valve is open and the gas is flushing inside the syringe
To Next Page
Loading...
