HT2800T_en_c.doc Page 9 of 275
1 Introduction
1.1 Intended Use and Restrictions
HT2800T is an all-in-ones GC autosampler for static Headspace analysis, liquid sample injection
and SPME.
The autosampler must be used in a professional environment, and only by properly trained
users. The autosampler must be used according to the regulations in force regarding the safety
in testing laboratories.
A list (not exhaustive) of typical applications of the autosampler is reported below:
•
Environmental analysis
•
Quality control in the chemical and pharmaceutical industry
•
Studies related to pharmaceuticals
•
Drug discovery
Other techniques or areas of application are possible.
The safety measures and precautions regarding use, maintenance and repair, are not intended
for applications that require the use of toxic or infectious substances.
Every possible mixture or omission of a component cannot be recognized or previously
prevented. The operator that will use the autosampler must be trained about the used
substances, their hazards, their use and their proper disposal. For the correct use of the used
substances, refer to chemicals safety data sheets (MSDS) and to the regulations, laws,
directives and safety decrees currently in force that regulate the behaviour inside the testing
laboratories.
The insertion and positioning of the sample (vial), the insertion of syringes and all the other
preparation activities are under the sole responsibility of the user. The user must operate in
accordance with the law, in particular the ones concerning the safety of testing laboratories and
accident prevention.
To Next Page
Loading...
