HT2800T_en_c.doc Page 167 of 275
Select “Start Automatic run” to start the automatic run.
During the automatic run, a screen (“AUTOMATIC RUN EXECUTION”) displays status
information. Select:
•
“MENU” to display method or sequence information; to inject the sample immediately
(see paragraph 7 .3.2 “Immediate Injection“ and 7.3.4 “Priority injection“), to skip the
sample injection (paragraph 7.3.3 “Skip Next Vial option“), or to add or remove
samples in the tray/s;
•
“STOP” to end the automatic run (see paragraph 7.3.1 ”Interrupting an automatic run“).
Select “Exit” to exit from the “Automatic Run” screen and return to the home screen.
7.3.1 Interrupting an automatic run
During the automatic run, from the “AUTOMATIC EXECUTION SCREEN” (see paragraph 7.3
“Automatic run“), tap “STOP” to stop the procedure, then:
•
tap “ABORT” to stop the unit immediately;
•
tap “TERMINATE OVEN” to continue the execution of the samples present in the oven;
•
tap “RESUME” to continue operations as before.
7.3.2 Immediate Injection
Only for Headspace mode.
During the automatic run, the “AUTOMATIC EXECUTION SCREEN” is displayed (see paragraph
7. 3 “Automatic run“). Then follow the access sequence: AUTOMATIC EXECUTION
SCREEN>MENU>IMMEDIATE INJECTION
This function can only be activated during the sample conditioning. When this option is activated the
autosampler stops the current sample conditioning and immediately injects it.
Once the immediate injection has been made, the autosampler will re-start the automatic injection
procedure from the point of interruption.
7.3.3 Skip Next Vial option
Only for Headspace mode.
During the automatic run, the “AUTOMATIC EXECUTION SCREEN” is displayed (see paragraph
7. 3 “Automatic run“).
Then follow the access sequence: AUTOMATIC EXECUTION SCREEN>MENU>SKIP NEXT VIAL
To Next Page
Loading...