HTA HT2000H - Page 67

HT2000H_en_n.doc Page 71 of 167
Figure 81: System integrity tool installation_2
3 Screw by hands the upper part (indicated with the letter B in the figure below) of the
Syringe integrity tool to the lower part (indicated with the letter C in the figure below):
Figure 82: System integrity tool installation_3
4 Place the System Integrity tool in position number 6 of
Figure 1 for HT2000H/HT2000HT, and Figure 9 for HT2100H.
B
C
A