Figure 5-18 Opening the fixing clips on the DIMM slot
Step 9 Align the DIMM with the DIMM slot, and insert the DIMM into the slot. See Figure 5-19.
The two retaining clips pop up into place automatically.
NOTE
Do not touch the edge connector on a DIMM with bare hands. Before inserting a DIMM, ensure that the
edge connector is not polluted.
Figure 5-19 Installing a DIMM
Step 10 Install the air duct. For details, see 3.11 Installing the Air Duct.
Step 11 Install the chassis cover. For details, see 3.7 Installing the Chassis Cover.
Step 12 Install the server. For details, see 4.4 Installing the Server on Guide Rails.
Step 13 Connect the power cables. For details, see 3.5 Connecting Cables to a PSU.
Step 14 Power on the server. For details, see 3.1 Powering On the Server.
Step 15 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the TaiShan Rack Server iBMC User Guide.
----End
TaiShan 2280 V2 Server
User Guide
5 Optional Part Installation
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 102
To Next Page
Loading...
