Figure 2-26 Riser card 1 (three x8 slots)
l The riser card shown in Figure 2-27 supports full-height full-length dual-width GPUs. It
provides PCIe slots 2 and 3 when installed in I/O module 1 and PCIe slots 5 and 6 when
installed in I/O module 2.
NOTE
l This card must be used together with the power cable provided by Huawei.
l Only slots 2 and 5 support full-height full-length dual-width GPUs.
Figure 2-27 Riser card 2 (one x8 slot and one x16 slot)
l The riser card shown in Figure 2-28 is required for I/O module 1 or 2 in a server with 8
x 2.5-inch SAS/SATA drives and 12 x 2.5-inch NVMe SSDs. Ports A, B, and C are
Slimline cable connectors.
TaiShan 2280 V2 Server
User Guide
2 Components
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 21
To Next Page
Loading...
