Figure 4-18 Checking the TaiShan 2280 V2
Procedure
Step 1 Check indicator status.
Ensure that hardware devices are working correctly.
For details, see 2.2 Front Panel Indicators and Buttons and 2.4 Rear Panel Indicators.
Step 2 Check the TaiShan 2280 V2.
l Check the TaiShan 2280 V2 using the iBMC WebUI.
a. Log in to the iBMC WebUI. For details, see 4.6.4 Logging In to the iBMC
WebUI.
NOTE
You are advised to change the default password when logging in to the iBMC for the first
time. For details, see 4.6.6 Changing Initial Passwords.
b. Choose System > Firmware Upgrade, and view the version information, as shown
in Figure 4-19.
Check that the TaiShan 2280 V2 versions meet site requirements.
TaiShan 2280 V2 Server
User Guide
4 Setup
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 73
To Next Page
Loading...
