v Gears
Check for broken teeth on the platen gear and the pinch roller gear.
Attention: Failure to install the bellcrank and platen gear properly can result in damage to the gears. Be
certain the retaining clip is seated in the groove on the platen shaft.
Platen
Outside
Pulley
Paper Feed
Motor Pulley
Front Tractor
Drive Gear
Belt
Tension
Lever
Lower Feed
Roller Pulley
Figure 61. Paper Feed Main Drive.
(Viewed From Right Side) Arrows show forward (up) paper feed.
e90atd3
Platen
Gear
Platen
Gear
Figure 62. Platen Pinch Roller Gear.
(Viewed From Left Side)
Chapter 5. Removals and Adjustments 307
To Next Page
Loading...
