IBM 4247 User Manual

Table 11. MAP 0150: Power Supply (continued)
Questions/Actions Yes No
17. a. Power off (O) the printer.
b. Install the attachment card.
v For Model A00, see “Serial Attachment Card -
Model A00” on page 390.
v For Models 001, and 002, see “Coax
Attachment Card - Models 001, and 002” on
page 392. Or, for the twinax attachment, see
“Twinax Attachment Card - Models 001, and
002” on page 396.
v For Model 003, see “Model 003 Attachment
Cards: Serial, Twinax, LAN, Coax” on
page 359.
c. Power on (|) the printer.
Does the power supply fan run OK?
Go to step 18 on page 87. Power off (O) the printer.
Install a new attachment card.
v For Model A00, see “Serial
Attachment Card - Model A00” on
page 390.
v For Models 001, and 002, see “Coax
Attachment Card - Models 001, and
002” on page 392. Or, for the twinax
attachment, see “Twinax Attachment
Card - Models 001, and 002” on
page 396.
v For Model 003, see “Model 003
Attachment Cards: Serial, Twinax,
LAN, Coax” on page 359.
Run T&D in automatic mode to verify
correct printer operation. For Model
A00, see “How To Run the Test and
Diagnostic (T&D) Programs” on
page 161. For Models 001, 002, or 003,
see “How To Run the Test and
Diagnostic (T&D) Programs” on
page 201.
Chapter 1. Diagnosing Problems
86

IBM 4247 Specifications

General

Brand	IBM
Model	4247
Category	Printer
Language	English