IBM 5100 User Manual

Routine
Number Description, Error Code Meaning
TR0333
Erase activ~(08) status for track 1 (data track) should be 0933 Bad sense bit found.
present.
Note: This test leaves the erase coil on.
0936
Bad sense bit found.
TR0336
Select magnet active status (20) should not be
/"
present.
'~/
TR0337
Select magnet active status
(20) for forward tape motion
0937
Bad sense bit found.
should be present,
Note: This test leaves the forward tape and select magnet
active commands on.
t
TR0338 Select magnet active status (20) for reverse tape motion 0939 Bad sense bit found.
should be present.
Note: This test leaves the reverse tape and
select magnet active commands on.
,TR0348
Cartridge in place status (10) should be present.
0948
Bad sense bit found.
TR0349
File protect status (02) should be present.
0949
Bad sense bit found.
TR0350
EOT status (80) should not be present.
0950
Bad sense bit found.
/
3-46

IBM 5100 Specifications

General

Release Year	1975
RAM	16 KB - 64 KB
Storage	204 KB tape drive
Display	5-inch CRT
Operating System	APL/BASIC
Processor	IBM PALM (1.9 MHz)