IBM 5100 User Manual

The following chart shows the order and the concepts
used in diagnosing 5100 problems:
POWER
ON/RESTART
Bring Up
Diagnostic
Diagnostic
Control
Program1 (DCP1)
MAPs and MDls
34
No
No
-
Runs automatically with POWER ON or RESTART
- Located in
ROS
- Tests 5100 internal machine functions
- Displays bring
up halt codes (A through K)
- Go to MAP 0200
- Selected from the keyboard
- Located in
ROS
- Tests and loops bring up diagnostic tests
- Error displayed
for MAP entry
- Selected from the Start MAP
- MDI programs stored
on tape/diskette
- MAPs stored in the (MLM) binder

IBM 5100 Specifications

General

Release Year	1975
RAM	16 KB - 64 KB
Storage	204 KB tape drive
Display	5-inch CRT
Operating System	APL/BASIC
Processor	IBM PALM (1.9 MHz)