IBM DS3500 Introduction And Implementation Guide

7914support2-0209.fm Draft Document for Review March 28, 2011 12:24 pm
408 IBM System Storage DS3500: Introduction and Implementation Guide
Non-importable components
Some components cannot be imported during the import array procedure. These
components are removed during the import procedure:
򐂰 Host-to-logical drive mappings
򐂰 VolumeCopy pairs
򐂰 FlashCopy logical drives and FlashCopy repository logical drives
Import Array procedure
In this section we describe the steps to import an array.
1. Open the Storage Manager logical tab and select the array to be imported. The status of
the array should be Exported - ready for import. Select the Advanced  Maintenance 
Import Array menu command as shown in Figure 14-108.
Figure 14-108 Import Array
2. The Introduction (Import Array) window is displayed, as shown in Figure 14-109 on
page 409. Read the information and then click the Next button to continue.

IBM DS3500 Specifications

General

Brand	IBM
Model	DS3500
Category	Storage
Language	English