iSeries direction 77
Draft Document for Review October 18, 2004 5486Direction.fm
Refer to “Products and features no longer marketed by IBM” on page 840 for a
list of the recommended replacements for many withdrawn features and
products.
Features and devices not supported with V5R3
iSeries Models 600, 620, 640, 650, 650, S10, S20, S30, S40, SB1, 150, and
earlier generations of AS/400 systems, are not supported with V5R3. Also the
following features are not supported with IBM i5/OS V5R3:
#2811 PCI 25 Mbps UTP ATM
#2812 PCI 45 Mbps Coax T3/DS3 ATM
#2815 PCI 155 Mbps UTP OC3 ATM
#2816 PCI 155 Mbps MMF ATM
#2817 PCI 155 Mbps MMF ATM IOA
#2818 PCU 155 Mbps SMF OC3 ATM
#2819 PCI 34 Mbps Coax E3 ATM
#4815 PCI ATM 155 Mbps UTP OC3
#4816 PCI ATM 155 Mbps MMF
#4818 PCI ATM 155 Mbps SMF OC3
#2761 and #4761 PCI Integrated Analog Modem
The other input/output adapters (IOAs) and controllers, which are supported with
V5R2 on Models 800, 810, 825, 870, and 890, are supported with V5R3 on the
Model 520, 550 and 570.
Some hardware features are supported with V5R3 but are not supported on all
iSeries models. Refer to the Planning Web site for more information:
http://www-1.ibm.com/servers/eserver/iseries/support/planning/
v5r3hardware.html
Features and devices not supported with V5R2
AS/400 Models 4xx and 5xx are not supported with V5R2 or later. Also the
following features are not supported with V5R2 or later:
#2750/#4750 PCI ISDN BRI U IOA
#2751/#4751 ISDN adapters
#4800 PCI Cryptographic Processor
#6385/#6485 QIC-5010 13 GB ¼-inch Cartridge Tape
The #2761/#4761 PCI Integrated Analog Modem supports the fax function only
with V5R2. The IPX protocol is not supported with V5R2. The NetVista™ Thin
Clients device is not supported with V5R2.
To Next Page
Loading...
Need help?
General