iSeries Model 810 199
Draft Document for Review October 18, 2004 5486m810.fm
– Eight DIMM memory positions (plug directly onto the processor (direct
attach)
– Embedded Base IOP (CCIN 286E)
– Common Service Processor (CSP) (CCIN 25F0)
#2469 Processor (SSTAR 2-way, CCIN 25EB) includes:
– 4 MB L2 cache per processor
– Sixteen DIMM memory positions via the memory riser card (CCIN 2884)
– Base I/O backplane (CCIN 282F)
– Embedded Base IOP (CCIN 284E)
– Common Service Processor (CSP) (CCIN 282F)
The iSeries for Domino processors include a regular processor feature and a
special server feature. The server feature is used for pricing and for initial order
placement. Upgrades are supported in the normal way based on the Processor
and Edition feature.
Refer to “Table 7: Summary of the iSeries Model 810” on page 96 to find
Processor CPW, Mail and Calendar Users (MCU), 5250 CPW, and to determine
the processor feature code and QPRCFEAT value.
Main storage
Supported memory features for the #2465, #2466, and #2467 processors are:
#3092 - 256 MB Main Storage (DIMM DDR 128 Mb technology) (Unstacked)
#3093 - 512 MB Main Storage (DIMM DDR 256 Mb technology) (Unstacked)
#3094 - 1 GB Main Storage (DIMM DDR 256 Mb technology) (Stacked)
#3096 - 2 GB Main Storage (DIMM DDR 256 Mb technology) (Stacked)
Configuration considerations include:
A single main storage DIMM is allowed.
Additional DIMMs must be added in pairs of the same capacity and
technology.
Eight slots are available in the base system for main storage DIMMs, which
plug directly onto the backplane.
Supported memory features for the #2469 processor are:
#3022 - 128 MB Main Storage (64 Mb technology)
Support can be ordered only up to the minimum number of DIMMs required to
meet a pairing or quad system memory requirement.
To Next Page
Loading...
Need help?
General