iSeries I/O processors 327
Draft Document for Review October 18, 2004 5486IOp.fm
#2743 1 Gbps PCI Ethernet IOA
#2760 PCI 1 Gbps Ethernet UTP Adapter
#4838 PCI 100/10 Mbps Ethernet IOA
#2744 PCI 100 Mbps Token Ring IOA
One #0225 (1 Gbps Ethernet on the Integrated xSeries Server) is required for
each 1 Gbps Ethernet adapter selected to run on the #2791/#2891.
One #0224 (100/10 Mbps Ethernet on the Integrated xSeries Server) is required
for each #4838 selected to run on the #2791/#2891.
One #0223 (100 Mbps Token-Ring on the Integrated xSeries Server) is required
for each #2744 selected to run on the #2791/#2891.
Native iSeries functions are not supported, and the #2791/#2891 servers do not
support external host LAN.
The #2791/#2891 requires three PCI card slots on the system or expansion
tower backplane. Two slots are consumed by the #2791. The third slot is reduced
to a short card slot, which is then used by the first LAN IOA card.
The #2791/#2891 ships with a keyboard or mouse splitter cable.
The #2791/#2891 supports only the Windows NT and Windows 2000 operating
systems. These points apply:
The #0325 IPCS Extension Cable for Windows is the default (but may be
removed).
A minimum of 128 MB xSeries IOP memory is required.
The #1700 IPCS Keyboard or Mouse for Windows is the default (in those
countries (regions) that offer it).
A display must be connected to the Integrated xSeries Server to support
Windows.
For a non-U.S.A. keyboard or mouse and display, see:
http://www.iseries.ibm.com/windowsintegration
#2792/#2892/#9792 PCI Integrated xSeries Server
The #2792 and #2892 PCI Integrated xSeries Server contain a 1.6 GHz
processor and four memory slots in the xSeries IOP.
The #2792 is supported on the CEC of Models 820, 825, 830, 840, 870, and 890.
It is also supported on the #0578/#5078 PCI Expansion Unit, #0588/#5088
To Next Page
Loading...
Need help?
General