iSeries Model 595 165
Draft Document for Review October 18, 2004 5486m595.fm
#4482 4 GB ¼-inch Cartridge Tape Device *
#4483 16 GB ¼-inch Cartridge Tape Device *
#4486 25 GB ¼-inch Cartridge Tape Device *
#4487 50 GB ¼-inch Cartridge Tape Device *
#4682 4 GB ¼-inch Cartridge Tape Device
#4684 30 GB ¼-inch Cartridge Tape Device
#4685 80 GB VXA-2 Tape Device
#4686 25 GB ¼-inch Cartridge Tape Device *
#4687 50 GB ¼-inch Cartridge Tape Device
An external uninterruptible power supply is recommended to protect the system
unit and any external components against utility power outages.
IBM Service Representatives perform the Model 595 initial installation and model
upgrades.
IBM is offering a service to aid in configuring partitioned systems. Customers can
order the charged #8453 Base Customer Placement. Configurations are built
with hardware components using placement information from the LPAR
Verification Tool (LVT). The customer is responsible for submitting LVT
information. #8453 is supported on new system builds.
Processor features
The processor features for the Model 595 include the:
#8981 Model 595 Processor book (POWER5 1.65 GHZ 0/16-way CCIN
52A4)
– Two 8-way Multi Chip Modules (MCMs)
– Sixteen DDR1 memory card slots (cards plug into processor book planar)
– Six HSL-2/RIO-G adapter slots
#8461 Base activations for 16-way, 32-way, and 64-way systems
– Eight required with 16-way systems
– Sixteen required with 32-way systems
– Thirty-two required with 64-way systems
Additional single processor activations are orderable with #7925
Refer to “On Demand features” on page 178 for a cross reference of the
processor and CoD features.
To Next Page
Loading...
Need help?
General