IBM eserver i5 - Processor Features

5486m800.fm Draft Document for Review October 18, 2004
186 IBM Eserver i5 and iSeries System Handbook
򐂰 #7136 DASD Expansion Unit - 6 slot
– DASD six-position expansion unit
– Supports an additional six disk units (for a total of 12) in the #7116
– Requires a #7116 System Unit Expansion
򐂰 #7137 DASD Concurrent Maintenance Cage
– DASD six-pack cage for the Model 800
– Supports concurrent disk maintenance and replaces the standard
non-concurrent maintenance DASD six-pack cage
– Provides a higher speed interface for drives, more than double the
bandwidth of the base DASD cage
– Recommended for 15k rpm disk drives
– Required if a #2757 PCI-X Ultra RAID Disk Controller, #7116 System Unit
Expansion, or #4326 35.16 GB 15k RPM Disk Unit is installed
򐂰 Uninterruptible power supply
An external uninterruptible power supply is recommended to protect the
system unit and any external components against utility power outages.
The Model 800 initial installation is Customer Setup (CSU). Processor upgrades
within models are performed by IBM Service Representatives.
Processor features
򐂰 #2463 Model 800 Processor (SSTAR Uni, CCIN 25B9) includes:
– Eight Dual Inline Memory Modules (DIMM) memory positions (plug directly
onto the processor, direct attach)
– Embedded Base IOP (CCIN 286C)
– Common Service Processor (CSP) (CCIN 25B9)
򐂰 #2464 Model 800 Processor (SSTAR Uni, CCIN 25BA) includes:
– Eight DIMM memory positions (plug directly onto the processor, direct
attach)
– Embedded Base IOP (CCIN 286C)
– Common Service Processor (CSP) (CCIN 25B9)
The iSeries for Domino processors include a regular processor feature and a
special server feature. The server feature is used for pricing and for initial order
placement. Upgrades are supported in the normal way based on the Processor
and Edition feature.