5486m870.fm Draft Document for Review October 18, 2004
222 IBM Eserver i5 and iSeries System Handbook
#4686 25 GB ¼-inch Cartridge Tape Device
#4687 50 GB ¼-inch Cartridge Tape Device
IBM Service Representatives perform the Model 870 initial installation and model
upgrades.
Processor features
The #2486 8/16-way (POWER4 1.3 Ghz) includes:
Processor Capacity Card (CCIN 7419 or CCIN 7421)
Processor 0 (CCIN 25D3)
Processor 1 (CCIN 25D3)
The #2486 Model 870 has two processor modules. Each processor module has
eight processors. The system comes with a minimum of eight processors
activated. Specify one #1611 870 CUoD Activation feature for each additional
standby processor activated (maximum of eight). Specify one #1776 TCoD
Enablement feature for each additional standby processor when approaching the
limit of usable on/off processor days.
The #2489 5/8-way (POWER4 1.3 Ghz) includes:
Processor Capacity Card (CCIN 7431 or CCIN 7433)
Processor 0 (CCIN 25D3)
The #2489 Model 870 has one processor module. Each processor module has
eight processors. For #2489, the processor module should be plugged in
plug/slot 0. The system comes with a minimum of five processors activated.
Specify one #1614 POD Activation feature for each additional standby processor
activated (maximum of eight). Specify one #1776 TCoD Enablement feature for
each additional standby processor when approaching limit of usable on/off
processor days.
The #2496 2/16-way (POWER4 1.3 Ghz) includes:
Processor Capacity Card (CCIN 7440)
Processor 0 (CCIN 25D3)
Processor 1 (CCIN 25D3)
The #2496 Model 870 has two processor modules. Each processor module has
eight processors. The system comes with a minimum of two processors
activated.