5486M825.fm Draft Document for Review October 18, 2004
210 IBM Eserver i5 and iSeries System Handbook
The Model 825 initial installation and model upgrades are performed by an IBM
Service Representative.
Processor features
The #2473 3/6-way (POWER4 1.1 GHz) includes:
Three processor cards (CCIN 25DC)
96 MB L3 Cache (16 MB L3/ processor)
Smart Chip Processor VPD Card (CCIN 2473)
Base I/O backplane (CCIN 25CA)
#9787 CCIN 28B3 Expansion Card (provides two HSL-2 ports)
CCIN 289D Connector Card
Specify one #1609 825 CUoD Activation feature for each additional standby
processor activated (maximum of three). Specify one #1773 TCoD Enablement
feature for each additional standby processor when approaching limit of usable
on/off processor days.
The #2495 1/6-way (POWER4 1.1 GHz) includes:
Three processor cards (CCIN 25DC)
96 MB L3 Cache (16 MB L3/ processor)
Smart Chip Processor VPD Card (CCIN 2473)
Base I/O backplane (CCIN 25CA)
#9787 CCIN 28B3 Expansion Card (provides two HSL-2 ports)
CCIN 289D Connector Card
Select one #1779 On/Off Capacity on Demand enablement feature for each
additional standby processor when approaching the limit of usable on/off
processor days.
Refer to “Table 8: Summary of the iSeries Model 825” on page 98 to find
Processor CPW, Mail and Calendar Users (MCU), and 5250 CPW, and to
determine the processor feature code and QPRCFEAT value.
Main storage
The following memory features are available on the Model 825:
Note: The capacity on demand (permanent and temporary) capabilities,
including activation, enablement, and billing features, are described in
“Capacity on demand” on page 46.
To Next Page
Loading...
Need help?
General