Towers, racks, and high-speed link 265
Draft Document for Review October 18, 2004 5486Towr.fm
The #5075 is not supported on Models 520, 550, 570, and 595. The #5075 was
withdrawn from marketing on 21 November 2003.
#5075 PCI Expansion Tower schematic
#7002 HSL Enabler
The #7002 is a feature HSL internal flex cable, which enables connection to a
#5075 PCI Expansion Tower. It can be ordered only on the #2248, #2250, #2422,
and #2431 processors of the Model 270.
This cable connects the processor using a right-angle bus connector to the back
of the machine. Two HSL cables (#14xx) are required to connect the system unit
to the expansion tower.
On processor upgrades from #2248, #2250, #2422, or #2431 to other processor
features, the marketing configurator removes for Record Purpose Only (RPO) the
#7102 from the inventory records.
Right
Back
575W
Power Supply
#5156
PO2
Fan
B01
Fan
#5156
B02
OP Panel
Front
Fan
B01
OP Panel
Fan
#5156
B02
Disk Unit
Cage
DB1
575W
Power Supply
PO1
575W
Power Supply
PO1
575W
Power Supply
#5156
PO2
DISK SLOTS
D01
D02
D03
D04
D05
D06
1 Embedded IOP
5,6 IOP/IOA
3,4 IOP/IOA/Int. xSeries Svr
2 DISK IOA
PCI Cards
7,8 IOA
7,8 IOA
Short
5,6 IOP/IOA
3,4 IOP/IOA
1,2 IOP/IOA/Int. xSeries Svr
Multi-
Adapter
Bridge
Boundary
Multi-Adapter Bridge
Bus Number
C04
C02
C03
C05
C06
C07
EMBED
C01
Slots
PCI
PCI
PCI
DISK IOA
PCI
PCI Short
PCI
PCI
PCI
Multi-
Adapter
Bridge
Boundary
C08
Legend
Base Feature
Required Feature
Unavailable if
Integrated xSeries
Server is installed
Note 1: If C05 has an Integrated xSeries Server,
slot C06 is unavailable, and slot C07 is available
only as a short slot.
Note 2: If C02 has an Integrated xSeries Server,
slot C03 is unavailable, and slot C04 is available
only as a short slot.
1
2
Note 3: If #5700/#5701 is installed in C01
then move Disk IOA to next available slot.
Restriction: #5700/#5701 must be placed in a
32-bit slot