5486LPOpS.fm Draft Document for Review October 18, 2004
560 IBM Eserver i5 and iSeries System Handbook
V5R2 of OS/400 is the last release to support the following RISC models:
150
600, 620, 640, 650
S10, S20, S30, S40
Refer to “Planning information” on page 73 for information about OS/400 and
processor compatibility.
Version 5 OS/400 is offered for no additional charge. See “New with V5R3” on
page 599.
The following sections briefly describe the components of i5/OS. Programs within
i5/OS are described in “Programs within IBM i5/OS” on page 563. Refer to “IBM
i5/OS V5R3 options” on page 575 and “Options included in OS/400 V5R2” on
page 838 for a list of all OS/400 options available at V5R3 and V5R2.
OS/400 Version 5 is delivered on CD-ROM to speed loading of software and to
reduce the risk of media errors. All manuals are delivered in softcopy on
CD-ROM.
National language and multilingual support
The iSeries server with i5/OS is a worldwide product that addresses many
country (region)-unique requirements. For different countries
(regions)/languages, specific support is provided, either with translated
machine-readable information (MRI), such as screens and messages, or with
keyboards and displays on the local or remote workstation twinaxial controller.
Multilingual support allows multiple users on the same system to operate in
different languages. This means that system messages, displays, and help
information, as well as user applications, can be presented to the end user in
their national language.
Note: V5R2 of OS/400 does not run on models of the AS/400 system based
on internal microprogram instruction (IMPI) processors (CISC models) and
some earlier RISC models, namely, the Bxx, Cxx, Dxx, Exx, Fxx, 100, 135,
140, 2xx, 3xx, 4xx, 500, 510, and 530.
To Next Page
Loading...
Need help?
General