iSeries Model 520 113
Draft Document for Review October 18, 2004 5486m520.fm
DVD-RAM. The second slimline bay is straight IDE and is usable only with
AIX 5L or Linux partitions on 9406 systems.
– In the rack drawer configuration, the bottom bay is for the operator panel.
With a deskside configuration, the operator panel is mounted in a separate
bracket attached to the top of the system. The bottom bay in a deskside
configuration is left empty and is covered by a plate insert.
Two serial ports and two USB 2.0 ports
These ports are not usable by i5/OS.
Two 1 Gb, 100 Mb, and 10 Mb Ethernet ports
These ports are not usable for a local area network (LAN) console.
Base Service Processor (CCIN 28D7) (plugs in slot P1-C7)
Two HMC ports and two SPCN ports
Two high-speed loop (HSL)-2/RIO-G ports
#9844 Base PCI IOP (plugs in slot P1-C6)
This provides support for up to two IOAs (slots P1-C3 and P1-C5).
Required features
The required features for the 520 system unit include:
Specific combinations of the Processor feature, Edition feature, and Server
feature are allowed as shown in the following table.
Processor Server
feature
Edition feature Software
group
Processor feature
code or
QPRCFEAT value
#8950 #0900 #7390, #7391, #7393 Express
#7450 Value
P05 7450
#8951 #0901 #7392, #7394 Express
#7451 Value
P10 7451
#8952 #0902 #7458 Standard P10 7458
#7459 Enterprise P10 7459
#8953 #0903 #7452 Standard P10 7452
#7453 Enterprise P10 7453
#8954 #0904 #7454 Standard P20 7454
#7455 Enterprise P20 7455
To Next Page
Loading...
Need help?
General