5486m520.fm Draft Document for Review October 18, 2004
114 IBM Eserver i5 and iSeries System Handbook
Edition content varies by the processor and server features that are selected.
For more information, see “iSeries Editions” on page 58.
Refer to the Model 520 summary chart in “Table 1: Summary of the iSeries
Model 520” on page 83 to determine the processor feature code and
QPRCFEAT value.
Internal disk units - 10k or 15k rpm only
– #4317 8.58 GB 10k RPM Disk Unit*
– #4318 17.54 GB 10k RPM Disk Unit*
– #4319 35.16 GB 10k RPM Disk Unit
– #4326 35.16 GB 15k RPM Disk Unit
– #4327 70.56 GB 15k RPM Disk Unit
One of the following load source specify codes is required:
– #0829 - #4318 Load Source Specify*
– #0830 - #4319 Load Source Specify
– #0834 - #4326 Load Source Specify
– #0835 - #4327 Load Source Specify
DVD-ROM or DVD-RAM
#8955 #0905 #7456 Standard P20 7456
#7457 Enterprise P20 7457
#7555 High Availability P20 7457
Note: The Express Editions #7390, #7391 and # 7393 i5 Model 520
provide 30 5250 OLTP workloads while the #7392 and #7394 Express
Editions provide 60 CPW. The Value Edition for the #7450 and #7451
Model 520 provides 30 and 60 CPW respectively for 5250 OLTP
workloads. The Standard Edition for the Model 520 processors provides
limited 5250 CPW for 5250 OLTP workloads. The Enterprise and High
Availability Editions provide maximum 5250 CPW for 5250 OLTP
workloads. The Enterprise and High Availability Editions also provide
support for Capacity on Demand (permanent and temporary).
Note:
– * supported for conversion only
– **supported on upgrade
To Next Page
Loading...
Need help?
General