iSeries I/O processors 329
Draft Document for Review October 18, 2004 5486IOp.fm
The #2792/#2892 supports only the Windows 2000 and Windows .NET Server
operating systems. These points apply:
The #0325 IPCS Extension Cable for Windows is the default (but may be
removed).
A minimum of 1 GB xSeries IOP memory is required.
The #1700 IPCS Keyboard or Mouse for Windows is the default (in those
countries (regions) that offer it).
A display must be connected to the Integrated xSeries Server to support
Windows.
For a non-U.S.A. keyboard or mouse and display, see:
http://www.iseries.ibm.com/windowsintegration
The #2792, #2892, and #9792 were
withdrawn from marketing 01 January 2004.
#2799/#2899 PCI Integrated xSeries Server
The #2799 and #2899 PCI Integrated xSeries Server contain a 1.0 GHz Intel
Pentium III processor and four memory slots in the xSeries IOP.
The #2899 is supported only on the Model 270 system unit and on the #5075
PCI Expansion Tower when it is attached to the Model 270.
Each memory slot can contain either a 128 MB, a 256 MB, or a 1024 MB server
memory card. This provides a total memory capacity ranging from 128 MB to
4GB.
At least one server memory card is required.
The feature numbers of the xSeries IOP memory cards are:
#2795/#2895 - 128 MB server memory (withdrawn from marketing 19
November 2004 but #2895 still available for conversions)
#2796/#2896 - 256 MB server memory (withdrawn from marketing 19
November 2004 but #2895 still available for conversions)
#2797/#2897 - 1 GB server memory
Note: When the maximum memory is installed, only 3712 MB is addressable.
Allowable main storage increments (MB)
128 256 384 512 640 768 896 1024
To Next Page
Loading...
Need help?
General