iSeries I/O adapters and controllers 373
Draft Document for Review October 18, 2004 5486IOA.fm
chained with the 7207-122 physically connected first. No #0120 attachment
specify code is required for the 7210-020.
One 7207-122 QIC-SLR Tape Bridge Box (4 GB External ¼-inch Cartridge
Tape Drive) and one 7210-025 External DVD-RAM: The two devices are daisy
chained with the 7207-122 physically connected first.
One 7208-345 60 GB External 8mm Tape Drive and one 7210-020 External
CD-ROM: The two devices are daisy chained with the 7208-345 physically
connected first. No #0120 attachment specify code is required for the
7210-020.
One 7208-345 60 GB External 8mm Tape Drive and one 7210-025 External
DVD-RAM: The two devices are daisy chained with the 7208-345 physically
connected first.
The #0120 7210-020 Attachment Specify is required for each 7210-020 External
CD-ROM to be connected directly (not daisy chained) to the system through a
#5705.
The #0162 Extended Single Ended Attach Specify is required when these
devices are directly attached (not second on a daisy-chained string) to an iSeries
server via a #5705 PCI-X Tape/DASD Controller:
7329-308 SLR100 ¼-inch Tape Autoloader
7210-025 External DVD-RAM
If two external SCSI ports are required, order a #5712.
Migration tower PCI hardware
Some or all of the IOAs listed in the following sections were withdrawn from
marketing
. For a complete list of withdrawn features, see “Products and features
no longer marketed by IBM” on page 840. This section is included for reference
purposes to assist in planning system upgrades.
#2720/#9720 Base PCI WAN/Twinaxial IOA
#2721/##9721 Base PCI Two-Line WAN IOA
#2722 Twinaxial Workstation IOA
Note: If the 7210-020 is daisy chained with another external device, the #0120
specify code must not be present.
Note: If either of these devices is daisy chained with another device, the
#0162 specify code must not be present.
To Next Page
Loading...
Need help?
General