iSeries Model 570 141
Draft Document for Review October 18, 2004 5486m570.fm
Direct access storage device (DASD) backplane (CCIN 28DB)
– One 6-pack DASD cage, supporting up to six 1-inch disk drives.
– Load source disk installs in card slot 4.
Removable media backplane (CCIN 28DC)
– Two removable media slots.
– CCIN 180A converts slimline slot from IDE to SCSI and blocks second slot
– 9406 Model 570 only supports one slimline removable media slot for the
required #2640 DVD-ROM (default) or the #5751 DVD-RAM.
Power and cooling
– Power Supply Distribution backplane (CCIN 28DD)
– System midplane (CCIN 28D9)
• Supports two hot-plug power supplies (CCIN 51B7)
• Two fans or blowers for temperature regulation purposes
Two base 1400W 240V power supplies (CCIN 51B7)
CEC backplane (CCIN 27AE)
CPU Regulator (CCIN 28E8)
– A system with one 0/2 way processor cards includes one CPU Regulator.
– A system with two 0/2 way processor cards (a 2/4-way system) includes
two CPU Regulators.
Base I/O adapters (IOAs) or I/O processors (IOPs)
– #5709 RAID Enabler Card (CCIN 5709):
The required card fits into a dedicated slot on the backplane and does not
use a PCI-X adapter slot. The #5709 provides RAID capability for the
embedded disk controller.
– #9793 or #9794 Two-Line IOA with Modem: PCI-X Slot 2
– #9844 Base PCI IOP: One in PCI-X Slot 1
#1846 Operator Panel (CCIN 28D4)
A minimally configured stand-alone system requires a single operator panel
for operation.
Note: The 9406 Model 570 does not support a removable magnetic
media device in the base CEC. A tower and associated support or an
external tape or DVD-RAM device is required.
To Next Page
Loading...
Need help?
General