iSeries Model 595 161
Draft Document for Review October 18, 2004 5486m595.fm
– #182x -one or more of these features provide redundant power cabling
– #6186 Bulk Power Regulator
• Two required with 8/16-way processor feature
• Four required with 16/32-way processor feature
• Six required with 32/64-way processor feature
– Bulk Power Controller (CCIN 275D)
• Two required with all processor features
– #7837 Bulk Power Distribution
• Two required with 8/16-way processor feature
• Four required with 16/32-way and 32/64-way processor features
– Distributed Converter Assembly (DCA)
• Three DCAs are included as a base feature with the 8/16-way
processor
• Six DCAs are included as a base feature with the 16/32-way processor
• Twelve DCAs are included as a base feature with the 32/64-way
processor
CEC Rack Front and Rear Doors
– One feature includes both a front door and a rear door for the system unit
– Choice of #6251 Slim Line Doors or #6252 Acoustic Doors
#3757 Service Shelf Toolkit
– Every installation location must have access to one Service Tool Kit
– The IBM Marketing Configurator defaults to one. It can be removed in
multi-system orders to prevent multiple quantities shipped to the same
installation.
One Multiplexer Card is included in every processor book (CCIN 28E6)
One System Unit backplane
Two Clock Cards (CCIN 28E4)
One Front Indicator Light Strip (CCIN 291A) and one Rear Indicator Light
Strip (CCIN 291B)
Up to four 16-way processor books with each two 8-way MCMs
Sixteen main storage card slots in each processor book
Six slots for feature HSL-2/RIO-G adapters in each processor book
Two #7818 HSL-2/RIO-G 2-port Copper (CCIN 28D8) are compulsory per
system
To Next Page
Loading...
