iSeries I/O adapters and controllers 367
Draft Document for Review October 18, 2004 5486IOA.fm
7206-VX2 80 GB VXA-2 External Tape Drive
7207-122 QIC-SLR Tape Bridge Box (4 GB External ¼-inch Cartridge Tape
Drive)
7208-345 60 GB External 8mm Tape Drive
7210-020 External CD-ROM
7210-025 External DVD-RAM
7329-308 SLR100 ¼-inch Tape Autoloader
One 7210-025 External DVD-RAM and one 7210-025 External DVD-RAM:
The two devices are daisy chained.
One 7210-025 External DVD-RAM and one 7210-020 External CD-ROM: The
two devices are daisy chained with the 7210-025 physically connected first.
No #0120 attachment specify code is required for the 7210-020.
One 7207-122 QIC-SLR Tape Bridge Box (4 GB External ¼-inch Cartridge
Tape Drive) and one 7210-020 External CD-ROM: The two devices are daisy
chained with the 7207-122 physically connected first. No #0120 attachment
specify code is required for the 7210-020.
One 7207-122 QIC-SLR Tape Bridge Box (4 GB External ¼-inch Cartridge
Tape Drive) and one 7210-025 External DVD-RAM: The two devices are daisy
chained with the 7207-122 physically connected first.
One 7208-345 60 GB External 8mm Tape Drive and one 7210-020 External
CD-ROM: The two devices are daisy chained with the 7208-345 physically
connected first. No #0120 attachment specify code is required for the
7210-020.
One 7208-345 60 GB External 8mm Tape Drive and one 7210-025 External
DVD-RAM: The two devices are daisy chained with the 7208-345 physically
connected first.
The #0120 7210-020 Attachment Specify is required for each 7210-020 External
CD-ROM to be connected directly (not daisy chained) to the system through a
#5705.
The #0162 Extended Single Ended Attach Specify is required when these
devices are directly attached (not second on a daisy-chained string) to an iSeries
server via a #5705 PCI-X Tape/DASD Controller:
7329-308 SLR100 ¼-inch Tape Autoloader
7210-025 External DVD-RAM
Note: If the 7210-020 is daisy chained with another external device, the #0120
specify code must not be present.