iSeries I/O adapters and controllers 371
Draft Document for Review October 18, 2004 5486IOA.fm
3580-L23 IBM TotalStorage Ultrium 2 Tape Drive
3581-Lxx IBM Ultrium Tape Autoloader
3582-L23 IBM Ultrium Tape Library, LVD Ultrium 2 drive feature
3583-Lxx IBM Ultrium Scalable Tape Library, LVD Ultrium 2 drive feature
3584 UltraScalable Tape Library, LVD Ultrium 2 drive feature
7206-VX2 80 GB VXA-2 External Tape Drive
7207-122 QIC-SLR Tape Bridge Box (4 GB External ¼-inch Cartridge Tape
Drive)
7208-345 60 GB External 8mm Tape Drive
7210-020 External CD-ROM
7210-025 External DVD-RAM
7329-308 SLR100 ¼-inch Tape Autoloader
Two 7210 Model 025 External DVD-RAMs. The two devices are daisy
chained.
One 7210 Model 025 and one 7210 Model 020: The two devices are daisy
chained with the 7210-025 physically connected first. No #0120 attachment
specify code is required for the 7210-020.
One 7207 Model 122 and one 7210 Model 020: The two devices are daisy
chained with the 7207-122 physically connected first. No #0120 attachment
specify code is required for the 7210-020.
One 7207 Model 122 and one 7210 Model 025: The two devices are daisy
chained with the 7207-122 physically connected first.
One 7208 Model 345 and one 7210 Model 020: The two devices are daisy
chained with the 7208-345 physically connected first. No #0120 attachment
specify code is required for the 7210-020.
One 7208 Model 345 and one 7210 Model 025: The two devices are daisy
chained with the 7208-345 physically connected first.
The #0120 7210-020 Attachment Specify is required for each 7210-020 External
CD-ROM Drive to be connected directly (not daisy chained) to the system
through a #5702.
The #0162 Extended Single Ended Attach Specify is required when these
devices are directly attached (not second on a daisy chained string) to an iSeries
server, via a #5702 PCI-X Ultra Tape Controller:
7329-308 SLR100 ¼-inch Tape Autoloader
7210-025 External DVD-RAM
Note: If the 7210-020 is daisy chained with another external device, the #0120
specify code must not be present.