Summary of earlier AS/400, AS/400e, and iSeries models 815
Draft Document for Review October 18, 2004 5486MSum.fm
Model 820
Processor feature
#0150 #0151 #0152
Relative system performance
1
Processor CPW 1100 2350 3700
5250 CPW
8
None
#1521
#1522
#1523
#1524
#1525
#1526
#1527
0
-
-
-
-
-
-
-
0
-
-
-
-
-
-
-
0
-
-
-
-
-
-
-
Number/type/speed of processors 1/SSTAR/600 MHz 2/SSTAR/600 MHz 4/SSTAR/600 MHz
L2 Cache (MB) 2 4 4
Main storage (MB min/max) 256 - 16384 256 - 32768 256 - 32768
Main storage DIMMs 2/16 2/32 2/32
Minimum operating system level V5R1 V5R1 V5R1
Software group
11
P20 P20 P30
Note 1 CPW is used to measure the performance of all iSeries and AS/400e processors announced from September
1996 onward. The CPW value is measured on maximum configurations. The type and number of disk devices,
the number of workstation controllers, the amount of memory, the system model, other factors, and the
application running determine what performance is achievable.
Processor performance represents the relative performance (maximum capacity) of a processor feature
running CPW in a client/server environment. Processor capacity is achievable when the commercial workload
is not constrained by main storage and DASD. Interactive performance represents the relative performance
available to perform host-centric workloads. The amount of interactive capacity consumed reduces the
available processor capacity by the same amount.
On the Dedicated Servers for Domino, the Processor CPW is an approximate value reflecting the maximum
amount of non-Domino workload (10 to 15% of CPU) that can be supported.
Note 2 Total number of tape devices does not increase.
Note 3 One line is used if the #5544 System Console on Operations Console is used on a #9771 WAN adapter. One
line might be used if #5546 or #5548 System Console on LAN is selected and the #0367 Operations Console
PCI Cable is connected.
Note 4 There must be one CD-ROM or DVD-RAM per system.
Note 5 Includes the #503x Migration Tower and all SPD bus towers attached to the #503x.
Note 6 New systems only. Does not apply to migrated systems.