Referenced lists 837
Draft Document for Review October 18, 2004 5486ApList.fm
Distributed Data Management (DDM)
Distributed Relational Database Support
File Transfer Support
IBM Network Routing Facility (NRF) Support/400
ICF Retail Communications Support
ICF Finance Communications Support
Intersystem Communications Function
Interactive Terminal Facility (ITF)
ISDN Support
Non-ICF Finance Communications Support
Object Distribution Facility (ODF)
Remote Workstation Support
SNA Distribution Services (SNADS)
SNA Primary Logical Unit 2 Support
SNA/Management Services Transport
SNA Pass-through
SNA Upline Facility to System/370™ IMS™ and CICS Hosts
Systems Application Architecture (SAA) Common Programming Interface for
Communications (CPI-C)
TCP/IP support
X.21 Shorthold Mode (SHM) and multiple port sharing (MPS)
3270 Device Emulation
3270 SNA API Support for IBM 3278 Model 3, 4, and 5
3x74 Remote Attach
5x94 Remote Attach
5394/5494 SNA Backbone Support
ATM adapters not supported with i5/OS V5R3 include:
– #2811 PCI 25 Mbps UTP ATM IOA
– #2812 PCI 45 Mbps Coax T3/DS3 ATM IOA
– #2815 PCI 155 Mbps UTP OC3 ATM IOA
Note: OS/400 V5R2 is the final release to support the Asynchronous Transfer
Mode (ATM) networking technology and ATM adapters. The #5700, #5701,
#2743, or #2760 Gigabit Ethernet or #2838, #2849, or #4838 10/100 Fast
Ethernet with required infrastructure changes to the network as applicable
(switches, routers, etc.) are recommended replacements.
Gigabit Ethernet supports TCP/IP only. Therefore, Systems Network
Architecture (SNA) Traffic requires using ANYNET as SNA over TCP/IP.
10/100 Fast Ethernet supports both SNA and TCP/IP. Although the Fast
Ethernet adapter is limited to Unsheilded Twisted Pair (UTP) cable, an
external transceiver may be used to convert to multimode fiber (compatible
with ATM fiber).
To Next Page
Loading...
