1 - 11
(4) K2 PCI Express I/F Board (K2ST-34-011)
This board is installed at PC/AT (or compatible machine) PCI Express x1 slot and realizes the
access to modules of each function for K2.
The PC and K2 I/O Unit are available to connect by using a dedicated cable.
This board has the functions as below ;
(1) Generation of Sampling Clock
(2) Real-time waveform data sending / receiving by DMA (bus master)
(3) Command to the modules of each function for K2 (writing and loading of the register,
etc.)
(4) Observation on the condition of the modules of each function for K2
To Next Page
Loading...