4 - 7
This command is for excitation start by level scheduling.
(Available only in SHOCK)
This command is for restart the excitation by level scheduling.
(Available only in SHOCK)
Capturing is started by inputting Manual Trigger.
(Available only in CAPTURE)
Undo the editing process operated to the data.
(Available only in CAPTURE)
Calculation between numeral values is operated to the waveform data.
(Available only in CAPTURE)
Edging process that makes the beginning and the ending point of waveform
data smooth to zero is operated. (Available only in CAPTURE)
Data Length is converted by trimming the waveform data.
(Available only in CAPTURE)
Filtering process is operated to the waveform data.
(Available only in CAPTURE)
Frequency conversion of waveform data is operated.
(Available only in CAPTURE)
To Next Page
Loading...