Inficon Transpector CPM User Manual

1–15
Transpector CPM Operating Manual
1.12.7 Clean Room Requirements
The CPM is clean room compatible (including silicone rubber heaters).
1.12.8 Anti-Static Conditions
CPM passes standard EN 61326-1:2013.
1.13 Computer System Requirements
The minimum system requirements for FabGuard
®
Explorer Operating Software
are listed in Table 1-4:
INFICON can supply a controller to run the software that operates
Transpector CPM System. (Refer to section 1.4 on page 1-4.)
1.13.1 Operating System
FabGuard Explorer software requires either Windows 7 or Windows 8 for proper
operation.
See Chapter 10 or the FabGuard Explorer CD for FabGuard Explorer software
operation.
Table 1-4 Minimum computer requirements for FabGuard Explorer
Parameters FabGuard Explorer Requirements
Processor 2.4+ GHz Dual Core
Memory 4+ GB
Hard Drive
SATA 80 GB to 1 TB 7200+ RPM
Resolution 1024 X 768 16-bit color or greater
Ethernet Port One free Ethernet port for connection to Transpector CPM
Operating
System
Windows 7
®
or Windows 8
®

Inficon Transpector CPM Specifications

General

Brand	Inficon
Model	Transpector CPM
Category	Industrial Equipment
Language	English