Inficon Transpector CPM - Change IP Address

3–4
Transpector CPM Operating Manual
Right-click on a sensor to display the menu shown in Figure 3-2.
Figure 3-2 IMSSU right-click menu
3.3.1.1 Change IP Address
1 Right-click on the sensor and select Change IP Address. The TCP/IP
Properties window will display. (See Figure 3-3.)
Figure 3-3 TCP/IP Properties window
The TCP/IP Properties window displays the:
 Transpector CPM MAC Address
 Transpector CPM IP address
 Change To text box, to enter a new Transpector CPM IP address
 DHCP On or DHCP Off selection
CAUTION
Set DHCP Off so the IP address cannot be automatically
assigned.
2 Type the new IP address in the Change To text box.
3 Click Apply. Transpector CPM will automatically reboot and will return online
with the new IP address.
4 Launch Web UI.