Inficon Transpector CPM - Connecting to Transpector CPM

10 – 2
Transpector CPM Operating Manual
10.3 Connecting to Transpector CPM
1 Click Start and select FabGuard Explorer.
2 When FabGuard Explorer is opened for the first time, the message shown in
Figure 10-1 will display.
Figure 10-1 Transpector connection prompt
3 Click Yes.
4 The Connection Type message is displayed. Select MP RGA HTTP as the
connection type and Click OK. (See Figure 10-2.)
Figure 10-2 Transpector connection type