6.10. Advancing to Treatment Stage
Before advancing to the Treatment Stage, carefully check all orientations and verify:
◼ The ROT covers the target tissue including the required margins (determined by protocol and clinical
considerations).
◼ The ROT is completely within the Treatment Envelope.
◼ If it is necessary to correct the ROT, select it and modify it.
Confirm that both the patient and the nurse have been instructed in the use of the Stop MR Scan button
and that the patient is holding it and understands how to operate it (in case anesthesia and sedation allow
it).
1. Press this button on the main toolbar to advance to the next stage in the
treatment procedure.
2. The MR performs tracking scans to automatically detect the transducer location.
To Next Page
Loading...