IP-COM CPE6S - Page 103

Chapter 6 Network 95
Name
Description
1. After the VLAN function is enabled, the PoE/LAN port is used as a trunk port.
Management VLAN
It specifies the ID of the management VLAN of this device. The default ID is 1.
After changing the management VLAN, you can manage this device only after
connecting your computer to the new management VLAN.
WLAN VLAN ID
It allows you to set a VLAN ID for the wireless network of this device. By default, it
is set to 1000.
After the VLAN function is enabled, the WLAN interface functions as an access
port, whose PVID is the same as VLAN ID.