Chapter 9 Tools 177
9.2.4 Backup/Restore
The Backup/Restore function enables you to back up the current configuration of the CPE to a
local computer, and import the configuration file you export before.
If the CPE enters the optimal condition after you greatly change the configuration of the CPE,
you are recommended to back up the new configuration, so that you can restore it after
upgrading or resetting the CPE.
If you need to apply same or similar configurations to many devices, you can configure one of the devices,
back up the configuration of the device, and use the backup to restore the configuration on the other
devices. This improves configuration efficiency.
Backup
1. Choose Tools > Maintenance to enter the configuration page.
2. Click Backup/Restore.
3. Then click Backup on the pop-up window.
To Next Page
Loading...