IP-COM CPE6S - ARP Table

Chapter 5 Status 81
Name
Description
Received Packets
It displays the number of received and transmitted packets of the interface.
Transmitted Packets
Receive Error
It displays the number of received and transmitted error packets of the
interface.
Transmit Error
5.3.4 ARP table
ARP (Address Resolution Protocol) is a network layer protocol used to convert an IP address
into a physical address. The ARP table displays the IP address and its corresponding MAC
address the CPE visits, and the interface the packets pass through.
To access the page, choose Status, then ARP Table in Statistics part.
Parameters description
Name
Description
IP Address
It specifies the IP address of the host in the ARP table.
MAC Address
It specifies the MAC address corresponding to the IP address.
Interface
It specifies the interface used to communicate with the host.