IP-COM CPE6S - Network Service; Ddns

Chapter 8 Advanced 153
8.6 Network service
8.6.1 DDNS
Overview
This function is available only when the CPE works in WISP or Router mode.
DDNS, dynamic domain name service, enables the dynamic DNS client on the device to
deliver the current WAN IP address to the DNS server. Then the server maps the WAN IP
address to a domain name for dynamic domain name resolution.
This function often works with the port forwarding, DMZ host, and remote web management
functions. Then users can visit an address with a domain name instead of a dynamic WAN IP
address, which makes the visit easier.
Choose Advanced > Network Service to enter the page.
Parameters description
Name
Description
DDNS
It Specifies whether to enable the DDNS function.
Service Provider
It specifies Dynamic Domain Name Service provider. The device supports Dyndns,
No-ip.com, and 3322.org.
User Name
It specifies the user name/password used to log in to the dynamic DNS service,
which are the login user name and password you registered on the website of the
service provider.
Password
Domain Name
It specifies the domain name information obtained from the dynamic DNS server.
You need to enter the domain name which you registered on the website
manually.