Chapter 4 Quick setup 50
4.5 Repeater mode
4.5.1 Overview
In Repeater mode, the CPE connects 2 or more (this CPE supports 4 at most) wired networks
with a wireless link, and can be connected with both wired and wireless clients. To use this
function, the peer AP is required to support WDS function.
The CPE in Repeater mode can works with the CPE in Repeater or P2MP mode. Repeater
mode is usually used to achieve communication between multiple offices of an enterprise in
a city.
Application scenario
You want to combine multiple wired networks into one in a wireless manner. The network
topology is shown as below.
To Next Page
Loading...