Chapter 4 Quick setup 62
4.6 P2MP mode
4.6.1 Overview
In P2MP mode, the CPE connects 2 or more (this device supports 4 at most) wired networks
with a wireless link, but cannot provide wireless access service.
The CPE in P2MP mode can works with the CPE in Repeater mode.
The configuration procedure of P2MP mode is similar with Repeater mode. In the following
example, the CPE works in P2MP mode, and bridges to four CPEs work in Repeater mode.
Application scenario
The CPE is used to combine local networks into one in a wireless manner. The network
topology is shown as below.
To Next Page
Loading...