IP-COM CPE6S - Interface

Chapter 5 Status 80
Parameters description
Name
Description
IP Address
It specifies the IP address of the upstream device.
MAC Address
It specifies the MAC address of the upstream device.
Signal/Noise
−
Signal: It specifies the WiFi signal strength of the corresponding upstream
AP.
−
Noise: It specifies the ambient interference signal and electromagnetic
interference strength.
Transmit/Receive
It specifies the transmitting and receiving rate of the upstream device.
CCQ
It specifies the connection quality of the upstream device. A higher percentage
indicates a better connection quality.
Connection Duration
It specifies the time that has elapsed since this device bridges to the upstream
device.
5.3.3 Interface
It displays the IP address, MAC address and traffic information of the interfaces of the CPE.
To access the page, choose Status, then Interface in Statistics part.
Parameters description
Name
Description
Interface
It displays the wired interface, bridge interface, and WLAN interface of the
device.
IP Address
It displays the IP addresses of wired interface, bridge interface, and WLAN
interface.
MAC Address
It displays the MAC addresses of wired interface, bridge interface, and WLAN
interface.