Chapter 8 Advanced 151
It specifies the MAC address of the device to which the rule applies.
It specifies the period at which the rule takes effect.
It specifies the dates on which the rule takes effect.
It specifies the status of the rule.
Click to delete the rule.
8.5.2 Example of configuring MAC filter
Network requirement
The CPE is in WISP mode and has connected to the ISP hotspot to provide internet access for
a remote household.
Requirements: Only allow the parents’ devices to access the internet during 9:00 to 17:00,
Monday to Friday.
You are recommended to use the MAC Filter function to solve the problem.
Assume that: The MAC addresses of the parents’ devices are CC:3A:61:71:1B:6E and
CC:3A:61:75:1F:3E.
Configuration procedure
1. choose Advanced > MAC Filter to enter the configuration page.
2. Select a mode, which is Allow in this example.
3. Enter a remark in the Remark box (optional), which is Dad's smartphone in this example.
4. Enter the MAC address of the device, which is CC:3A:61:71:1B:6E in this example.
5. Specify a period, which is 9:00 to 17:00 in this example.
6. Tick the dates, which are Monday to Friday in this example.
7. Click Add.
8. Perform Step2 to Step7 to add the rule with the other MAC address.
To Next Page
Loading...