Chapter 9 Tools 171
----End
9.1.2 Manual
You can manually set the system time of the CPE. If you choose this option, you need to set the
system time each time after the CPE reboots.
Configuration procedure:
1. Choose Tools > Date & Time to enter the configuration page.
2. Set the Time Settings to Manual.
3. Enter a correct date and time, or click Synchronize with PC Time to synchronize the system
time of the CPE with the system time (ensure that it is correct) of the computer being used to
manage the CPE.
4. Click Save.
To Next Page
Loading...