Chapter 7 Wireless 100
Parameters description
It specifies whether to enable the wireless function. By default, it is enabled.
It specifies country or region where this device is located.
You can select the country or region to ensure that this device complies with the
channel regulations of the country or region.
It specifies the wireless network name.
It specifies whether to broadcast the SSID.
When the device broadcasts an SSID, nearby wireless clients can detect the SSID.
When this parameter is set to Disable, the device does not broadcast the SSID
and nearby wireless clients cannot detect the SSID. In this case, you need to
enter the SSID manually on your wireless client if you want to connect to the
wireless network corresponding to the SSID. This to some extent enhances the
security of the wireless network.
It specifies the wireless network mode of this device. Only wireless clients
supporting the listed network mode can connect to the CPE.
It specifies channel in which this device operates.
Auto indicates that this device automatically changes to a channel rarely used in
the ambient environment to prevent interference.
It specifies the shift of the channel center frequency.
With this function enabled, the channel center frequency shifts 5 MHz based on
the frequency defined by the IEEE 802.11 standard, so that the device can
exchange data on less interference channels.
Dynamic Frequency Selection.
With this function enabled, the CPE will automatically detect the frequency of
the radar system. When the CPE detects radar signals in the same frequency
with the CPE itself, the CPE will automatically switch to another frequency to
avoid interference with the radar system.
It specifies the transmit power of this device.
Higher number indicates wider WiFi coverage. Setting a proper transmit power
helps improve the performance and security of the wireless network.
It specifies the bandwidth of the operating channel of a wireless network. The
channel bandwidth varies with different network modes. Please select it based
on your actual operating environment.
Auto indicates that this device can switch its channel bandwidth based on the
ambient environment.
It specifies wireless transmission rate of the device. Auto is recommended.
The maximum negotiation rate varies with different channel bandwidths and
network modes. Refer to the web UI of the device for details.
The device supports various security modes for network encryption, including
To Next Page
Loading...