8─82
8.6 Setting
yyyy
yyyy
8
GPS Process Setting
1. Position
00’00.000’N
000’00.000’E
0. EXIT
00
3. Geodetic
2. Exclution
00 00 00 00 00 00
WGS-84
4. Antenna Height
0m
5. Fix Mode
2D
6. DOP Level
Up to 5
7. Position Average
LONG
8. Master Reset
OFF
9. Send Data
[VII] Average Level Setting (Position Average)
Set the time to average position information etc. output from the GPS receiver.
Procedures 1 Press [RADAR MENU] key twice.
The Radar Menu will appear.
2 Press [7] key.
NAV Equipment Setting Menu will appear.
3 Press [7] key.
GPS Setting Menu will appear.
4 Press [1] key.
GPS Process Setting Menu will appear.
5 Press [7] key.
Settting for the time of average is as follows
according to ROM version of GPS reciever.
R26.00: Select the time of average from
following
LONG(40sec)
STANDARD(10sec)
NONE.(2sec)
Other:Set the time(sec) of average
As the time of average is smaller, the update
speed of position information is higher but
dispersion is larger.
6 After having entered the values, press
[9] key to transmit the setting
contents to the GPS receiver.
Exit 1 Press [RADAR MENU] key.
The Main Menu will reappear.
To Next Page
Loading...
