JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.6 DISPLAY USER MAP
3ļ¼51
3
The Display Mark Type menu will open.
2) Specify whether to turn on or off the display for each type of
mark and line.
When is selected, the setting will reflect to all types of marks and lines.
3.6.2.2 Setting display by color
Procedures
1) Open the Display Mark Color Type menu by performing the menu
operation below.
āć
āć
The Display Mark Color Type menu will open.
2) Specify whether to turn on or off the display for each color type
of mark and line.
When is selected, the setting will reflect to all color types of marks and
lines.
3.6.2.3 Setting the mark font size
Procedures
1) Open the Mark Size menu by performing the menu operation
below.
āć
āć
The Mark Size menu will appear.
Off : All types are not displayed.
Individual : All types are displayed.
On : Setting by type is activated.
Off : All color types are not displayed.
Individual : Setting by color type is activated.
On : All color types are displayed.
1. All
U.Map
5. Mark Display Setting
2. Display Mark Color
1. All
U.Map
5. Mark Display Setting
3. Select Mark Size
To Next Page
Loading...
Need help?
General
