3－94
JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.8 APPLIED OPERATIONS
3.8.1.7 Fast Target Detection
• This function displays fast moving targets that are suppressed in scan-
correlative process mode.
• This function is enabled when , , or
is selected as the video process mode.
• If unwanted waves remain on the radar display, suppress them by using the
[SEA], [RAIN], or [GAIN] dial, or adjusting the interference rejection mode.
: Disables the Fast Target Detection function.
: Enables the Fast Target Detection function.
3Scan CORREL 4Scan CORREL
5Scan CORREL
Off
On
To Next Page
Loading...
